 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MMBTA13 SOT-23 BIPOLAR TRANSISTORS TRANSISTOR(NPN) FEATURES * Power dissipation PCM 0.3 W(Tamb=25OC) * Collector current ICM 0.3 A * Collector-base voltage V(BR)CBO: 30 V * Operating and storage junction temperature range TJ,Tstg: -55OCto+150OC Case: Molded plastic Epoxy: UL 94V-O rate flame retardant Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.008 gram 1 BASE SOT-23 COLLECTOR 3 MECHANICAL DATA * * * * * 2 EMITTER 0.006(0.15) 0.003(0.08) 0.055(1.40) 0.047(1.20) 0.043(1.10) 0.035(0.90) 0.020(0.50) 0.012(0.30) 0.004(0.10) 0.000(0.00) 0.020(0.50) 0.012(0.30) 0.100(2.55) 0.089(2.25) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 0.019(2.00) 0.071(1.80) 1 3 0.110(2.80) 2 0.118(3.00) Dimensions in inches and (millimeters) MAXIMUM RATINGS ( @ TA = 25 C unless otherwise noted ) RATINGS o O Max. Steady State Power Dissipation (1) @TA=25 C Derate above 25 C o SYMBOL PD TJ TSTG VALUE 300 150 -55 to +150 UNITS mW o o Max. Operating Temperature Range Storage Temperature Range C C ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted ) CHARACTERISTICS Thermal Resistance Junction to Ambient Notes: 1. Alumina=0.4*0.3*0.024in.99.5% alumina 2. "Fully ROHS Complant", "100% Sn plating (Pb-free)". SYMBOL R qJA MIN. TYP. MAX. 417 UNITS o C/W 2007-5 ELECTRICAL CHARACTERISTICS (@TA=25OC unless otherwise noted) Chatacteristic OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage (I C = 100uAdc, V BE = 0) Collector Cutoff Current (V CB = 30Vdc, I E = 0) Emitter Cutoff Current (V EB = 10Vdc, I C = 0) V(BR)CES ICBO IEBO 30 100 100 Vdc nVdc nVdc Symbol Min Max Unit ON CHARACTERISTICS(1) DC Current Gain (I C = 10mAdc, V CE = 5.0Vdc) (I C = 100mAdc, V CE = 5.0Vdc) Collector-Emitter Saturation Voltage (I C = 100mAdc, I B = 0.1mAdc) Base-Emitter On Voltage (I C = 100mAdc, V CE = 5.0Vdc) hFE VCE(sat) VBE 5000 10,000 1.5 2.0 Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current-Gain-Bandwidth Product (2) (I C = 10mAdc, V CE = 5.0Vdc, f= 100MHz) < Notes : 1. Pulse Test: Pulse Width-300ms,Duty Cycle<2.0% 2. fT = |hfe|.ftest fT 125 MHz RATING AND CHARACTERISTICS CURVES ( MMBTA13 ) 500 en, NOISE VOLTAGE (nV) 100 10uA 50 100uA 20 10 5.0 10 20 IC= 1.0 mA in, NOISE CURRENT (PA) 200 BANDWIDTH = 1.0 Hz RS~0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 10 20 BANDWIDTH = 1.0 Hz IC= 1.0 mA 100uA 10uA 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k f, FREQUENCY (Hz) f, FREQUENCY (Hz) Figure 1 Noise Voltage VT, TOTAL WIDEBAND NOISE VOLTAGE (nV) Figure 2 Noise Current 14 NF, NOISE FIGURE (dB) 200 BANDWIDTH = 10 Hz TO 15.7 kHz IC= 1.0 mA =10uA 12 10 8.0 6.0 4.0 2.0 IC=1.0mA BANDWIDTH = 10 Hz TO 15.7 kHz 100 70 50 30 20 10 uA 100 uA 100 uA 1.0 mA 10 1.0 2.0 5.0 10 20 50 100 200 500 100 0 1.0 2.0 5.0 10 20 50 100 200 500 100 RS, SOURCE RESISTANCE (KW) RS, SOURCE RESISTANCE (KW) Figure 3. Total Wideband Noise Voltage 20 TJ=25OC |hfe|, SMALL-SIGNALCURRENT GAIN Figure 4 Wideband Noise Figure 4.0 VV =5.0V CE =5.0V CE f=100MHz f=100MHz TJ=25OC TJ=25OC C, CAPACITANCE (PF) 10 7.0 5.0 2.0 Cibo Cobo 1.0 0.8 0.6 0.4 3.0 2.0 0.04 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 0.2 0.5 1.0 2.0 0.5 10 20 50 100 200 500 VR, REVERSE VOLTAGE (V) IC, COLLECTOR CURRENT (mA) Figure 5 Capacitance Figure 6 High Frequency Current Gain RATING AND CHARACTERISTICS CURVES ( MMBTA13 ) 500 en, NOISE VOLTAGE (nV) 100 10uA 50 100uA 20 10 5.0 10 20 IC= 1.0 mA in, NOISE CURRENT (PA) 200 BANDWIDTH = 1.0 Hz RS~0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.03 0.02 10 20 BANDWIDTH = 1.0 Hz IC= 1.0 mA 100uA 10uA 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k 50 100 200 500 1 k 2 k 5 k 10 k 20 k 50 k 100 k f, FREQUENCY (Hz) f, FREQUENCY (Hz) Figure 1 Noise Voltage VT, TOTAL WIDEBAND NOISE VOLTAGE (nV) Figure 2 Noise Current 14 NF, NOISE FIGURE (dB) 200 BANDWIDTH = 10 Hz TO 15.7 kHz IC= 1.0 mA =10uA 12 10 8.0 6.0 4.0 2.0 IC=1.0mA BANDWIDTH = 10 Hz TO 15.7 kHz 100 70 50 30 20 10 uA 100 uA 100 uA 1.0 mA 10 1.0 2.0 5.0 10 20 50 100 200 500 100 0 1.0 2.0 5.0 10 20 50 100 200 500 100 RS, SOURCE RESISTANCE (KW) RS, SOURCE RESISTANCE (KW) Figure 3. Total Wideband Noise Voltage 20 TJ=25OC |hfe|, SMALL-SIGNALCURRENT GAIN Figure 4 Wideband Noise Figure 4.0 VV =5.0V CE =5.0V CE f=100MHz f=100MHz TJ=25OC TJ=25OC C, CAPACITANCE (PF) 10 7.0 5.0 2.0 Cibo Cobo 1.0 0.8 0.6 0.4 3.0 2.0 0.04 0.1 0.2 0.4 1.0 2.0 4.0 10 20 40 0.2 0.5 1.0 2.0 0.5 10 20 50 100 200 500 VR, REVERSE VOLTAGE (V) IC, COLLECTOR CURRENT (mA) Figure 5 Capacitance Figure 6 High Frequency Current Gain RATING AND CHARACTERISTICS CURVES ( MMBTA13 ) 1.0 k 700 500 300 200 100 70 50 30 20 10 0.4 0.6 CURRENT LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT 1.0 2.0 4.0 6.0 10 20 VCE,COLLECTOR-EMITTER VOLTAGE(VOLTS) 40 TA=25 C O 1.0 ms TC=25 C O IC, COLLECTOR CURRENT(mA) 100us 1.0 s Figure 12 Active Region Safe Operating Area DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures. |
Price & Availability of MMBTA13
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |